renco electronics, inc. 595 international place, rockledge, fl 32955-4200 usa (321) 637-1000 ?toll free engineering hot line 800-645-5828 since 1955 fax: (321) 637-1600 web site:www.rencousa.com e-mail:sales@rencousa.com 227 s a f e t y a g e n c y a p p r o v e d c ur us iec-950 pending the rl-2252 series international power transformers are designed to meet ul, vde, iec, csa require- ments. available in rating of 2.5 through 50va. designed to ul1585 class 2 with all primaries ther- mally protected for your safety. pc board mount with all advantages of rl-2250 international series. hipot tested at 4000vrms. manufactured to class b (130 ) insulation. designed to the newest 2001 ul class 2 specification. all transformers do not exceed 30 volts under no load condition, and are thermally protected with a fuse. superior, safer, and lower cost than the competition. rl-2252 50/60 hz transformers all/tran class 2 secondary part no. rms rating rl-2252-2.5-12 12v @ .20a rl-2252-2.5-24 24v @ .10a *rl-2252-2.5-24/12 12v @ .20a or 24v @ .10a rl-2252-5.0-12 12v @ .42a rl-2252-5.0-24 24v @ .20a rl-2252-10-12 12v @ .83a rl-2252-10-24 24v @ .42a RL-2252-20-12 12v @ 1.66a rl-2252-20-24 24v @ .833a rl-2252-30-12 12v @ 2.50a rl-2252-30-24 24v @ 1.25a rl-2252-50-12 12v @ 4.20a rl-2252-50-24 24v @ 2.10a dimensions pin mfg. mfg. screw va l w h a b c dimensions m n p size quantity 2.5 1.625 1.312 1.125 .200 .250 1.000 0.025sq 1.062 #4 2 5.0 1.625 1.312 1.375 .200 .400 1.000 0.025sq 1.062 #4 2 10.0 1.875 1.562 1.375 .200 .400 1.140 0.038sq 1.25 #4 2 20.0 2.25 1.875 1.625 .400 .400 1.460 0.038sq 1.5 #4 2 30.0 2.625 2.187 1.562 .550 .275 1.680 0.045sq 1.75 2.187 #6 4 50.0 3.00 2.50 1.812 .600 .300 1.900 0.045sq 2 2.5 #6 4 all dimensions in inches clearance hole for optional nylon mtg. screw and nut. 3/16 min. c b a a h l 6 4 3 1 w p n m square pc terminals 7 9 10 12 12 115v 50/60 hz 115v 50/60 hz 6 4 3 1 7 thermal cut- off 7 9 10 12 * secondary for rl-2252-24/12 primaries are designed to be used simultaneously. that is, they must be used either series or parallel connected (as one winding).
|